Every new Maxview system will come complete with a Teltonika router and the Broadband Go SIM has already been installed in the router on your behalf.
For more information on how to install a SIM, please see step by step instructions below:
1) Use a pin to firmly press on SIM eject button. This is located next to the SIM slot. It is not necessary to apply force to the SIM tray itself. This may damage the router.
2) Remove the SIM tray and lay the standard size SIM card flat with the metal chip face facing up. Ensure it is in the correct orientation and sitting completely flat in the holder.
3) Insert the SIM tray back into the router. The metal chip should still be facing upwards and the SIM text on the front of the tray should be the correct way up. The tray should push into the slot without resistance until it is fully inserted.
The Sim is now inserted.
4) After SIM installation, it is often a good idea to Reset The Router to clear any SIM data stored previously.